Yes, the Lippert HD 6500-lbTuson 5th Wheel RV Landing Gear Motor # LC196308 will work as an upgrade replacement with more capacity for your Venture landing gear.
This motor works with landing gear systems branded as Lippert, Venture, Stromberg, or LCI. view full answer...
To replace the Equa-Flex Equalizers on your 2010 Montana Mountaineer you are going to want the MORryde Rubber Equalizers for Tandem Axle Trailers item # MR87ZR. These have nearly identical dimensions and will work great as both a replacement and an upgrade.
The MORryde is 6-1/2" on center from the front shackle bolt to the center of the rear shackle bolt. The height is 3-1/8" from the equalizer mounting bolt to the center line of the shackle bolts. I have linked a diagram with the dimensions... view full answer...
Appreciate the photo, and while you can replace those equalizers and add new bolts and shackle straps, the Road Armor won't work because the horizontal bolt spacing is 6 inches, which is too large a difference compared to the 7-1/2 inch spacing of your Equa-Flex. If yours are worn, you can replace them with new Equa-Flex, and there is also an install kit:
- Equa-Flex Cushioned Equalizers # LC279688
- Lippert Tandem Axle Equa-Flex AP Kit - Wet Bolts # LC64FR
These Equa-Flex have the same... view full answer...
The MORryde Shock Absorbing Suspension Equalizers item # MR27ZR are designed for Tandem axle trailers with 8,000 lbs axles and 35" axle spacing, so as long as your trailer meets these requirements. These equalizers would be a great option due to the rubber inserts that dampen road shock and offer up to 3" of suspension travel.
I have linked a diagram below that will show you the dimensions of this equalizer so you can compare them to the ones currently on your trailer. The item # MR27ZR... view full answer...
The correct replacement follow landing gear leg for a Keystone Montana Mountaineer 5th Wheel is the Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear part # LC178652. If you take a look at the photos on the part for this part you will be able to see what all it replaces. The only other replacements parts we offer are the internal bevel gears.
If you can send me photos of the damage I could better describe what is needed to fix the issue. view full answer...
Yes, you can use the 7,000 lbs Dexter Nev-R-Adjust Electric Trailer Brake Kit item # 23-464-465 instead of the item # 23-112-113 for the Nev-R-Adjust feature. However, the item # 23-112-113 is a 6,000 lbs system. If that's all you need I recommend the 6,000 lbs Dexter Nev-R-Adjust Electric Trailer Brake Kit item # 23-458-459. This is the 6,000 lbs Nev-R-adjust kit.
These brakes are 12" diameter x 2" wide, have a 5 bolt mounting flange, and fit 14-1/2", 15" or 16" wheels. This kit will... view full answer...
Go To Results